AQUAPUR PURGE FILTER 4m/h IN-OUT 3/4" FE HOL CARTRIDGE STAINLESS STEEL 90 m

It is used in domestic / residential applications for filtration of drinking water. It is installed at the point of entry of water into the location. The peculiarity of these filters is that it allows the elimination of particles during purging and at the same time can be done cleaning the cartridge and the carcass on the inside without having to stop the water and undo the filter. Part of the case is mobile and acts the cleaning piece that by turning left right cleans the cartridge and the housing on the inside. Working parameters: oMaximation pressure: 10 bar oWater temperature: 5 – 40 C Features: oCue material: plastic oCover material: brass oConnection: brass CW 617N sealing: O ring from EPDM oCartus filtering: stainless steel Use: oIt is used for mechanical water filtration, having a filtration degree of 90 microns and is recommended for water in municipal supply networks. oThe filter is mounted at the point of entry of the water into the location. oIt is necessary to perform a purjari after installation by operating the purge valve oin during purging, rotate 3-4 laps of 360 each part of the base of the filter clockwise to remove the large particles then rotate 3-4 turns of 360 each counterclockwise to clean the surface of the cartridge but also that of the filter housing. Attention! oRecommended ONLY for cold water supply circuits. oDesigned to be mounted in enclosures protected from frost, high temperatures. It is used in domestic / residential applications for filtration of drinking water. It is installed at the point of entry of water into the location. The peculiarity of these filters is that it allows the elimination of particles during purging and at the same time you can clean the cartridge and the housing on the inside without having to turn off the water and undo the filter. Part of the case is mobile and acts the cleaning piece that by turning left right cleans the cartridge and the housing on the inside. Working parameters: oMaximation pressure: 10 bar oWater temperature: 5 – 40 C Features: oCue material: plastic oCover material: brass oConnection: brass CW 617N sealing: O ring from EPDM oCartus filtering: stainless steel Use: oIt is used for mechanical water filtration, having a filtration degree of 90 microns and is recommended for water in municipal supply networks. oThe filter is mounted at the point of entry of the water into the location. oIt is necessary to perform a purjari after installation by operating the purge valve oin during purging, rotate 3-4 laps of 360 each part of the base of the filter clockwise to remove the large particles then rotate 3-4 turns of 360 each counterclockwise to clean the surface of the cartridge but also that of the filter housing. Attention! oRecommended ONLY for cold water supply circuits. oDesigned to be mounted in enclosures protected from frost, high temperatures.