REVERSE OSMOSIS STATION AQUAPUR WITH PUMP AND 600GPD Q = 1.58L / min

Based on the principle of separation by reverse osmosis, it can generate drinking water of the highest quality. It has the ability to generate a purified water flow that allows its use without storage vessel. It can reduce the concentrations of substances dissolved in water by up to 96%. Especially useful with coffee machines. Working parameters:

-Pressure: 1 – 4 bar

-Water temperature: 5 – 38C

-Ambient humidity: =90% Parameters of the supply water:

For a proper functioning of the station, the quality of the water at the entrance to it must be controlled from the point of view of the content of: -PH: 6.5-8.5

-TDS:1500 ppm

-Turbidity: 1 NTU

-Free chlorine: 0,1 mg/l

-Iron: 0,3 mg/l

-Manganese: 0,1 mg/l

-Hydrogen sulfide: 0 ppm

-Hydrocarbons: 0 ppm If the supply water does not meet these requirements, the service life of the membrane and pre-filter cartridges may be shortened. If the water supply is made from the well, perform a water analysis before installing a filtration system with reverse osmosis. in this situation it is recommended to contact a specialist. Features:

Compact system without tank, with water production at the time of consumption at high water flow (1.58L/min), quick installation and connection.

Transparent cover that allows viewing the operation mode.

Designed with disposable cartridges and simple instructions for replacement.

In addition, it has a visual system for informing the duration of use of filters.

Complex connections integrated in a collector, reduce the risk of water loss.

Efficient water-saving technology allows saving on the water bill.

The system turns off automatically in case of leakiness, the smart display will continue to blink along with the alarm sound signal.

Use: Recommended for filtering water from the public supply system but also water from well. It is mounted at the point of consumption (POU ex: under the sink) Operation: 4 stages of treatment:

-stage 1 – sediment filter 5 microns.

-stage 2 – Pre Carbon Block filter.

-3rd stage – reverse osmosis membrane.

-stage 4 – Post Carbon Block filter. Attention!

-Where the water source is microbiologically unsafe, it is periodically recommended to disinfect the water source, the installation and the entire reverse osmosis system.

-The station needs connection to the sewerage.

-Designed to be mounted in enclosures protected from frost, excessive temperatures.

-Recommended ONLY for cold water supply circuits.

Technical specifications

Item Type: OSMOSIS STATION

UM Packages; PIECE

Package Quantity: 1